|
》Gas Detection Instruments>Environment
|
|
|
 |
|

|
- D-R 216 Continuous in-situ skoke
density measurement instrument according to principle of
transmission.
- Easy application
- Installation without calibration
- 0,4 - 6.25m measuring path length
- 0-25, -50, - 100% opacity
- Typical applications: Opacity
measurement in Heating Stations, Power Plants, Refineries etc.
- Type tested for plants according
to “TA Luft”
|
| Measuring Method |
|
The instrument applies the 2-beam alternate light
method following the autocollimation principle, i.e., the light beam
crosses the measuring section twice. The unit measures and evaluates
the light beam's weakening caused by the dust content within the
measuring section. An electromagnetically actuated rotary diaphragm
switches between the measuring beam and a comparator light beam. For
check value compensation, comparative measurings of 2 seconds
duration each occur every 64 sec. A photocell alternatingly receives
the measuring and the comparator light beam. There is only one joint
amplifier for the measu-ring and the comparator beams, thus
compensating for light bulb and photoelement ageing, for temperature
influences as well as for amplifier long-time drift. The emitter
light being modulated with 25 Hz, no daylight influences will occur.
A separate purge air fan keeps the heated optical boundary surfaces
free from soiling. Optional: Automatic cutoff system with prealarm.
The cutoff threshold value can be adjusted over the entire measuring
area. |
| Application |
|
Typical application fields are monitoring tasks in
- heating plants, industrial boiler plant,s barracks,
hospitals, schools, etc.,
- garbage and waste incinerators
- monitoring dust extraction and filtering systems
- process controlling in the chemical industry.
According to Circular Letter Ull 8556134/4 of the FMI
dated 18.9.1978, the D-R 216 Smoke Density Meter is suitable for
monitoring gaseous and dustlike emissions. |
| Registration |
|
Type tested to the guidelines for emission measuring
equipments of the Federal Ministry of Interior - FMI Circular
Ull 8-556134/4 dated 18.9.1978 by TÜV Rheinland Technical Inspection
Agency, Test Reports # 936/808016 of 15.2.79 and # 936/804004 of
7.2.85
Itemized in the list of suitable instruments for
continuous registration of emissions - Joint Gazette # 22 of
26.7.1985 of the Federal Ministry of
Interior. |
|
|
| |
|
|
|